ZYXEL PMG5317-T20B (01) PDF MANUAL

Report any errors on this page in the comment box below.

PDF Manual Excerpt: Quick Start Guide PMG5317-T20B Wireless N GPON HGU with 4-port ENGLISH GbE Switch and USB EN 1Connect the fiber optic cable from your service Hardware Connections provider's network to the PON port. Warning! To avoid possible eye injury, do NOT look into an operating fiber-optic module's connector. 2Connect a phone to the phone port using the phone cable. 3Connect a computer to the LAN port using the yellow Ethernet cable. 14 Connect the power cable to the modem and press the power button. Note: Only use the USB port for file sharing. POWER ON Warning! Use a UPS that is LPS-compliant. PON PHONE LAN POWER 1 2 3 4 EN 5 Make sure the LEDs are on and check the status. 5 1 2 3 4 1 2 2 1 4 3 2 1 WLAN/ WPS USB PHONE LAN INTERNET PON ALM BATT POWER On : Registered to IMS but no voice On: Linked successfully. communication. Blinking: Trying to link up. Blinking: Voice on communication. Off: Link off. Off: No registered SIP accounts to this line, or device power off. On : Linked successfully. (Any LAN port) Blinking: Data transmitting. Off : Link off. POWER Configuring your PMG5317-T20B Internet Setup Open a web brower and go to http://192.168.1.1 Enter the default User Name (admin) and Password (1234), then click Login. http://192.168.1.1PMG5317-T20B User Name Password 1234 Login 1/2 1 PON PHONE 1LAN On: Power on and system ready. Off: Power off. admin User Name : admin Password : 1234 (default) Quick Start Guide ENGLISH 1212 Drill two holes on the wall at the distance of 173.2mm. Insert the screw anchors and screws. Make sure the screws are fastened well enough to hold the weight of the PMG5317-T20B. Place the PMG5317-T20B so the wall mount holes line up with the screws (2-a). Slide the PMG5317-T20B down gently to fix it into place (2-b). PMG5317-T20B Wireless N GPON HGU with 4-port GbE Switch and USBWPSWireless Setup Press the WPS button until the WLAN LED flashes in green. Press the WPS or Connect button on the wireless client. No WPS The SSID and wireless key are on the device's label. Wi-Fi Find the device with its SSID. Enter the wireless key to connect. setup WPS Android Only 12 / WPS 12 WPS ON Wireless Setup / NO WPS 1 2 2 minutes within More than 5 seconds. Wi-FiZyxel_xxxxxx WiFi 2.4G ON Connect 1 2 3 4 1 2 SSID (2.4GHz) Zyxel_xxxxxx Wireless key Wireless SSID XXXXXXXX Wireless key Wall Mounting 12 173.2mm 2/2 Copyright © 2018 Zyxel Communications Corp. All Rights Reserved. Zyxel_xxxxxx XXXXXXXX x2 x2 2-a 2-b 2 1 4 1 2 3

FREE ENGLISH

PDF OPERATING INSTRUCTIONS

PDF USER GUIDE - PDF USER MANUAL

PDF OWNER GUIDE - PDF OWNER MANUAL

PDF REFERENCE GUIDE - PDF REFERENCE MANUAL

PDF INSTRUCTION GUIDE - PDF INSTRUCTION MANUAL